Jump to content


Photo

BL5


  • Please log in to reply
2 replies to this topic

#1 0 Tron

0 Tron

    n00b

  • Members
  • 4 posts
  • Location:Chch NZ
  • Vehicles:
    • 1992 Legacy BC Ti Type S

Posted 25 May 2017 - 6:14 PM

Does the bl5 rear subframe fit a B5 and what about the bl5 brakes?

Actually does anything from the bl fit a bc or do they need modifications?

#2 Sammy

Sammy

    Boosted!

  • Members
  • 651 posts
  • Location:Christchurch
  • Vehicles:
    • 1991 GTS2 legacy sedan (project)
      1995 2 door gc1 - Retna Impreza

Posted 26 May 2017 - 12:12 AM

Pretty sure they are completely different rear setup and are not compatible. Same goes with the front, all the arms are different and mount points have changed.

Probably front shocks would be only interchangeable part and they probably wouldn't fit properly height wise.

ver3-7 sti stuff is bolt in and what you should be looking for
Posted Image

#3 Reuben

Reuben

    THAT guy...

  • Committee
  • 5848 posts
  • Location:Queenstown / Auckland
  • Vehicles:
    • 1998 Legacy GTB Limited
      1995 Legacy 200T
      1990 Legacy Ti Type-S

Posted 30 May 2017 - 12:04 AM

Also Rev-D BH front subframes are fantastic upgrades, lots of extra bracing and re-enforcing. GD stuff is the same, GD rear subframes are equally as nice an upgrade. Can't use GD arms though, they have a wider track (this may not apply to GG stuff).

I should note I've never tried bolting these up, so can't say they fit. They do in theory, but who knows what little differences in the chassis and whatnot may snag you up.

I'll be sure to post up when I eventually try!!! What I have done is chuck a BG subframe in my BC, that was a 100% perfect fit.
Posted Image


<Shale>: Blighter doesn't really have an accelerator pedal, it's more just a loudness pedal. You can change volume, but you won't go any faster.


<mjlqtown>: (Southern US accent) I'v excised the demon! This car is now clear!


<Reuben>: I feel like when you stomp the throttle in Blighter, it's like you've startled an old man!




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users